This industrial O-ring, constructed from robust carbon steel, offers exceptional sealing performance. Its precise dimensions ensure a tight fit and reliable containment in critical industrial applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.911" |
| Outside Diameter | 10.269" |
| Cross Section | 0.146" |
A proven choice for industrial professionals, this O-ring is engineered with a precise Inside Diameter of 6.911 inches, an Outside Diameter of 10.269 inches, and a cross-section of 0.146 inches. Fabricated from high-grade carbon steel, it exhibits excellent tensile strength and resistance to abrasion, making it ideal for high-pressure and high-temperature environments. Its robust construction guarantees a secure seal, preventing leakage of fluids and gases under demanding operating conditions, thus maintaining system integrity and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring by carefully working it into the groove without excessive stretching. |
| Using an incompatible lubricant which can degrade the O-ring material. | Always verify lubricant compatibility with carbon steel O-rings before application. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic assemblies, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||