This industrial-grade Silicone O-ring provides reliable, long-lasting sealing in extreme environments. Engineered for superior performance and durability in critical applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 6.837" |
| Outside Diameter | 8.361" |
| Cross Section | 0.199" |
Built to exacting engineering tolerances, this Silicone O-ring (AS568-364 equivalent) features an Inside Diameter of 6.837 inches, an Outside Diameter of 8.361 inches, and a Cross Section of 0.199 inches. The premium silicone material offers exceptional resistance to a wide temperature range (-60°F to 450°F), ozone, UV radiation, and many chemicals, making it ideal for static or dynamic sealing in food processing, medical devices, automotive, and aerospace industries where purity and resilience are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Verify the O-ring is seated evenly and without twists in its groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears in the O-ring. | Gently stretch the O-ring and use a lubricant compatible with the O-ring material if necessary. |
| Installing a twisted O-ring, which compromises the seal and can cause premature failure. | Always ensure the O-ring is seated flat within its groove without any twists. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Equipment, Aerospace and Automotive Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||