Engineered for critical sealing applications, this Industrial Silicone O-Ring offers exceptional resilience and a broad operating temperature range. Its robust construction ensures reliable performance in demanding environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.334" |
| Outside Diameter | 10.727" |
| Cross Section | 0.247" |
A proven choice for industrial professionals, this Silicone O-Ring is precisely manufactured to exacting tolerances, featuring an Inside Diameter of 7.334 inches, an Outside Diameter of 10.727 inches, and a Cross Section of 0.247 inches. The material composition, while primarily silicone for its inherent flexibility and resistance to extreme temperatures, is reinforced with Aluminum 6061 for enhanced structural integrity and corrosion resistance. This combination makes it ideal for applications requiring both superior sealing capabilities and mechanical robustness.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully position the O-ring within its designated groove. 3. Apply a light, compatible lubricant if necessary to prevent pinching or tearing during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply lubricant and gently compress the O-ring into the groove, avoiding sharp tools or excessive pressure. |
| Incorrect O-ring size selection, resulting in leaks or improper sealing. | Always verify the required O-ring dimensions against the groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic actuators, High-temperature fluid containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||