This industrial-grade O-ring features a robust Nylon reinforcement within its Silicone matrix, providing superior mechanical strength and resilience for critical sealing applications. Engineered for extreme environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.244" |
| Outside Diameter | 8.673" |
| Cross Section | 0.190" |
Purpose-built for heavy-duty applications, this Industrial O-Ring boasts a precise Inside Diameter of 4.244 inches, an Outside Diameter of 8.673 inches, and a Cross Section of 0.190 inches. The core Silicone material offers exceptional flexibility and resistance to a wide range of temperatures (-50°C to +230°C), while the integral Nylon reinforcement significantly enhances its tensile strength, abrasion resistance, and resistance to extrusion under high pressure. This combination makes it ideal for static and dynamic sealing in hydraulic systems, pneumatic equipment, and chemical processing where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully lubricate the O-ring and groove with a compatible lubricant. 3. Gently install the O-ring into the groove, avoiding excessive stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply controlled pressure and utilize appropriate tooling to avoid overstretching or pinching the O-ring. |
| Incorrectly sized O-ring for the groove, causing leaks or premature failure. | Verify all O-ring dimensions (ID, OD, CS) against groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, High-Temperature Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||