This industrial silicone O-ring, featuring a brass filler, offers superior sealing in challenging environments. Its precise dimensions ensure reliable performance in a wide range of high-pressure and high-temperature applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 6.045" |
| Outside Diameter | 4.550" |
| Cross Section | 0.079" |
Specified by design engineers worldwide, this robust O-ring is constructed from high-grade silicone with embedded brass particles for enhanced thermal conductivity and EMI shielding. The precise internal diameter of 6.045 inches, outer diameter of 4.550 inches, and a critical cross-section of 0.079 inches are maintained to exacting tolerances. This composition makes it ideal for sealing applications requiring excellent resistance to extreme temperatures (-50°C to +230°C), ozone, UV, and various chemicals, while also providing a degree of conductivity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply lubricant and gentle pressure. If resistance is met, re-inspect the groove and O-ring for obstructions or incorrect size. |
| Installing into a contaminated or damaged groove. | Thoroughly clean and inspect mating surfaces. Repair or replace damaged grooves before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Aerospace sealing systems, Automotive fluid containment, Medical device components, High-temperature industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||