This industrial O-ring, crafted from premium silicone, ensures superior sealing performance in challenging environments. Its precise dimensions guarantee a reliable, leak-proof seal for critical applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.400" |
| Outside Diameter | 8.476" |
| Cross Section | 0.072" |
Manufactured under strict quality controls, this industrial O-ring boasts a nominal inside diameter of 8.400 inches, an outside diameter of 8.476 inches, and a cross-sectional diameter of 0.072 inches. Constructed from high-grade silicone, it offers exceptional flexibility, wide temperature resistance (-50°C to +200°C), and excellent resistance to many chemicals and ozone. The carbon steel material specification indicates a robust housing or substrate for the silicone sealing element, suggesting applications where structural integrity and sealing are paramount in a demanding industrial setting.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully place the O-ring into its designated groove, avoiding stretching or twisting. 3. Verify proper seating and compression before assembling the mating component.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or damage. | Adhere to specified torque values for all fasteners to ensure controlled compression. |
| Using incompatible lubricants or cleaning agents that degrade the silicone. | Consult material compatibility charts and use only approved lubricants and cleaning agents for silicone seals. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: High-temperature fluid sealing, Chemical processing equipment, Food and beverage machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||