This industrial-grade silicone O-ring provides reliable sealing in a wide range of operating conditions. Its robust construction ensures excellent performance and longevity in critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.891" |
| Outside Diameter | 2.461" |
| Cross Section | 0.229" |
Manufactured under strict quality controls, this silicone O-ring features an Inside Diameter (ID) of 5.891 inches and an Outside Diameter (OD) of 2.461 inches, with a precise cross-section of 0.229 inches. Silicone's inherent properties of excellent thermal stability, resistance to extreme temperatures (-60°C to 200°C), and flexibility make it ideal for sealing applications involving food and beverage processing, medical devices, and electrical insulation where purity and inertness are paramount. The material's resistance to UV radiation, ozone, and weathering further enhances its suitability for extended service life in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove or mating surfaces are clean and free from debris. 2. Carefully install the O-ring, avoiding any stretching or twisting. 3. Verify proper seating and compression of the O-ring within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently guide the O-ring into the groove, ensuring it remains within its elastic limits. |
| Installing on a dirty or damaged surface. | Thoroughly clean and inspect all mating surfaces before O-ring installation to prevent leaks and premature failure. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Equipment, Electrical Enclosures and Insulation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||