This industrial O-ring, crafted from high-grade Silicone and designed for robust sealing, offers precise dimensions and exceptional resilience for critical applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.579" |
| Outside Diameter | 4.795" |
| Cross Section | 0.213" |
Built to exacting engineering tolerances, this Silicone O-ring boasts an Inside Diameter of 1.579 inches, an Outside Diameter of 4.795 inches, and a cross-section of 0.213 inches. Its Aluminum 6061 base material provides excellent corrosion resistance and structural integrity, making it suitable for moderate temperature ranges and environments where chemical inertness is paramount. This combination ensures reliable sealing in static and dynamic applications, preventing leaks and maintaining system integrity under operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the O-ring for any damage or debris before installation. 2. Ensure the mating surfaces are clean, dry, and free from sharp edges. 3. Carefully seat the O-ring into its designated groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently maneuver the O-ring into the groove, using a lubricant if necessary, to prevent excessive strain on the material. |
| Using a dirty or damaged groove. | Thoroughly clean the groove and inspect for any imperfections that could compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Automotive fluid systems, Industrial machinery seals, Food processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||