This industrial-grade silicone O-ring provides robust sealing capabilities for demanding applications. Its brass material composition ensures excellent corrosion resistance and durability in harsh environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 1.742" |
| Outside Diameter | 0.798" |
| Cross Section | 0.088" |
A high-performance industrial component, this silicone O-ring is engineered with precision to meet stringent sealing requirements. Featuring an inside diameter of 1.742 inches and an outside diameter of 0.798 inches, with a precise 0.088-inch cross-section, it offers optimal compression and sealing force. The inherent properties of silicone, such as its wide operating temperature range (-60°C to +230°C) and resistance to ozone, UV, and weathering, make it suitable for critical fluid and gas containment systems across various industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force. 3. Verify the O-ring is seated properly within its groove for a secure seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect O-ring size, leading to leaks or damage. | Always verify the required O-ring dimensions against the application's groove and shaft specifications. |
| Overstretching or twisting the O-ring during installation. | Install the O-ring smoothly, using appropriate tools if necessary, to prevent deformation and maintain sealing integrity. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Automotive fuel systems, Food and beverage processing equipment, Medical devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||