This industrial O-ring, crafted from durable carbon steel, offers exceptional sealing integrity. Its precise dimensions ensure a reliable fit for critical fluid and gas containment systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.171" |
| Outside Diameter | 6.020" |
| Cross Section | 0.112" |
Built to exacting engineering tolerances, this carbon steel O-ring features an inside diameter of 0.171 inches, an outside diameter of 6.020 inches, and a cross-section of 0.112 inches. The robust carbon steel construction provides excellent mechanical strength and resistance to abrasion, making it suitable for high-pressure environments and applications where durability is paramount. Its material properties ensure long-term sealing performance against a wide range of industrial fluids and gases. Typical applications include hydraulic systems, pneumatic assemblies, and general industrial machinery requiring dependable static or dynamic sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris or damage. 2. Carefully stretch the O-ring over the smaller component or into the groove, avoiding excessive force or twisting. 3. Verify the O-ring is seated evenly and without pinching before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to stretching or tearing. | Gently stretch the O-ring, using lubrication if necessary, and ensure it is not twisted or pinched. |
| Installing into a contaminated groove, compromising the seal. | Thoroughly clean the groove and mating surfaces before O-ring installation. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic Systems, Pneumatic Assemblies, Industrial Machinery Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||