This industrial O-ring, constructed from robust 304 stainless steel, offers exceptional sealing capabilities. Engineered for reliability, it ensures integrity in critical fluid and gas systems, resisting harsh environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.176" |
| Outside Diameter | 10.591" |
| Cross Section | 0.110" |
Specified by design engineers worldwide, this industrial O-ring is manufactured from premium 304 stainless steel, providing superior corrosion resistance and mechanical strength. Its precise dimensions – an Inside Diameter of 7.176", an Outside Diameter of 10.591", and a Cross Section of 0.110" – guarantee a precise and leak-proof seal. This material choice is critical for applications requiring high temperature tolerance and chemical inertness, making it ideal for chemical processing, food and beverage, and pharmaceutical industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the groove and the O-ring thoroughly. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-lubrication of the O-ring and groove. | Use only a minimal amount of compatible lubricant to prevent excessive pressure during installation and maintain seal integrity. |
| Twisting or stretching the O-ring during installation. | Install the O-ring gently, ensuring it seats evenly within the groove without deformation to prevent premature failure. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Food and beverage machinery, Pharmaceutical manufacturing, High-pressure hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||