This industrial-grade O-ring, constructed from durable Carbon Steel, provides superior sealing in high-pressure and extreme temperature environments. Engineered for precise fit and long-lasting performance in critical applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.215" |
| Outside Diameter | 8.241" |
| Cross Section | 0.122" |
Built to exacting engineering tolerances, this Silicone O-ring boasts an Inside Diameter of 4.215 inches, an Outside Diameter of 8.241 inches, and a precise 0.122-inch Cross Section. The robust Carbon Steel material offers exceptional mechanical strength, corrosion resistance, and thermal stability, making it ideal for demanding industrial sealing tasks. Its inherent resilience ensures a reliable seal against a wide range of fluids and gases, even under significant pressure and temperature fluctuations. This O-ring is designed to maintain its integrity and sealing capabilities in harsh operating conditions, minimizing leakage and downtime.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating groove and O-ring thoroughly. 2. Lubricate O-ring and groove with a compatible lubricant. 3. Carefully install O-ring into the groove, ensuring no twisting or damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubricant. | Always use a lubricant compatible with both the O-ring material and the media being sealed. |
| Overtightening fasteners. | Tighten fasteners to the manufacturer's specified torque to avoid over-compression and extrusion of the O-ring. |
| Installing a damaged O-ring. | Inspect the O-ring for any nicks, cuts, or abrasions before installation; replace if damaged. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic assemblies, High-temperature fluid containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||