Engineered for demanding industrial environments, this Silicone O-Ring ensures robust sealing performance. Its durable carbon steel construction provides exceptional resilience against pressure and wear.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.968" |
| Outside Diameter | 4.004" |
| Cross Section | 0.087" |
Purpose-built for heavy-duty applications, this industrial O-ring is fabricated from high-grade silicone, offering superior resistance to extreme temperatures (-60°C to +230°C) and a wide range of chemicals, oils, and solvents. The precise dimensions of a 6.968" inside diameter, 4.004" outside diameter, and a 0.087" cross-section ensure a tight, leak-proof seal in critical systems. Its carbon steel core provides enhanced structural integrity and dimensional stability under high stress, making it ideal for hydraulic systems, pneumatic actuators, and process equipment where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free from debris. 2. Carefully stretch the O-ring over the smaller diameter of the mating parts, avoiding excessive force that could damage the ring. 3. Gently seat the O-ring into its designated groove, verifying it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature failure or reduced sealing capability. | Employ a proper O-ring installation tool or carefully roll the O-ring into the groove to minimize stretching. |
| Installing a dirty or damaged O-ring, compromising the seal's integrity. | Inspect the O-ring for any nicks, cuts, or embedded debris before installation. Clean mating surfaces thoroughly. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic and Pneumatic Systems, Automotive and Aerospace Sealing, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||