This industrial-grade Silicone O-Ring, constructed with a robust 304 Stainless Steel housing, offers exceptional sealing integrity. Engineered for extreme temperatures and chemical resistance, it ensures reliable performance in critical applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 0.541" |
| Outside Diameter | 0.430" |
| Cross Section | 0.271" |
Specified by design engineers worldwide, this Silicone O-Ring boasts precise dimensions of 0.541" Inside Diameter, 0.430" Outside Diameter, and a 0.271" Cross Section. The 304 stainless steel offers superior corrosion resistance and mechanical strength, making it ideal for applications involving harsh chemicals, high pressures, and wide temperature ranges. Its silicone elastomer provides excellent flexibility, resilience, and resistance to ozone, UV, and weathering, ensuring long-term sealing performance in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully place the O-ring into its designated groove, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant if necessary, then assemble mating components, ensuring even compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently flex the O-ring to fit the groove without excessive tension. Use a lubricant if resistance is encountered. |
| Improper groove preparation, leaving burrs or contaminants. | Thoroughly inspect and clean the groove. Remove any sharp edges or foreign particles that could damage the O-ring. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Aerospace Fluid Systems, High-Temperature Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||