This industrial-grade Silicone O-Ring offers superior sealing capabilities in demanding environments. Engineered with a precise carbon steel construction, it ensures reliable performance and long-term integrity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.048" |
| Outside Diameter | 10.008" |
| Cross Section | 0.086" |
Manufactured under strict quality controls, this Silicone O-Ring boasts an Inside Diameter of 1.048 inches and an Outside Diameter of 10.008 inches, with a precise Cross Section of 0.086 inches. The carbon steel material provides excellent tensile strength and resistance to deformation, making it ideal for high-pressure and temperature applications. Its inherent flexibility and chemical inertness of silicone ensure a leak-proof seal across a wide range of industrial fluids and gases, preventing contamination and ensuring system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding any stretching or twisting. 3. Apply a light lubricant compatible with the O-ring material if necessary for easier assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring during installation. | Install the O-ring without excessive stretching. If needed, use a lubricant compatible with silicone to aid installation. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the sealing groove for any imperfections before O-ring installation. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic and pneumatic systems, Automotive engine seals, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||