This industrial-grade O-ring, constructed from robust 304 stainless steel, is engineered for exceptional sealing capabilities. Its precise dimensions ensure a secure fit and reliable performance in critical applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.273" |
| Outside Diameter | 1.682" |
| Cross Section | 0.232" |
Engineered for reliability and performance, this industrial O-ring boasts a precise inside diameter of 6.273 inches, an outside diameter of 1.682 inches, and a cross-section of 0.232 inches. Fabricated from high-grade 304 stainless steel, it offers superior corrosion resistance, chemical inertness, and high-temperature tolerance, making it ideal for use in food and beverage processing, chemical handling, pharmaceuticals, and demanding industrial fluid systems. The material's strength and durability ensure long-term, leak-free sealing under pressure and temperature extremes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the groove and the O-ring thoroughly to remove any contaminants. 2. Carefully inspect the O-ring for any defects, cuts, or nicks before installation. 3. Gently install the O-ring into the designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dirty or contaminated O-ring. | Always clean the O-ring and the installation groove prior to assembly to prevent premature failure and leaks. |
| Twisting the O-ring during installation. | Ensure the O-ring is installed in a straight manner, avoiding any rotational forces that can cause damage and compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Food and Beverage Manufacturing, Pharmaceutical Production, High-Temperature Fluid Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||