This industrial silicone o-ring, crafted from robust Aluminum 6061, ensures superior sealing performance in demanding environments. Its precise dimensions guarantee a reliable fit for critical applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.774" |
| Outside Diameter | 9.015" |
| Cross Section | 0.257" |
Precision-manufactured to tight tolerances, this industrial o-ring boasts an Inside Diameter of 7.774 inches, an Outside Diameter of 9.015 inches, and a 0.257-inch cross-section. The Aluminum 6061 construction offers excellent corrosion resistance and structural integrity, making it suitable for high-pressure and moderate-temperature applications. Its silicone material provides flexibility, good elasticity, and resistance to a range of chemicals, oils, and weathering. This combination of materials and dimensions is ideal for static and dynamic sealing in fluid power systems, chemical processing, and general industrial machinery where a reliable seal is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free from debris, and properly dimensioned. 2. Carefully stretch the o-ring over the smaller diameter component or into the groove, avoiding excessive force or sharp tools. 3. Once in place, ensure the o-ring is seated evenly within the groove before assembly of mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using sharp tools during installation, leading to nicks or cuts on the o-ring surface. | Employ plastic installation tools or manual manipulation, ensuring a smooth, snag-free installation process. |
| Over-stretching the o-ring, causing permanent deformation and premature failure. | Apply only the necessary tension to fit the o-ring, verifying its position and integrity before mating parts are assembled. |
| Installing the o-ring into a dirty or damaged groove. | Thoroughly inspect and clean the sealing groove for any foreign matter or imperfections that could compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Fluid Power Systems (Hydraulic and Pneumatic), Chemical Processing Equipment, General Industrial Machinery Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||