This industrial-grade Silicone O-ring offers exceptional flexibility and resilience. Engineered for reliable sealing in extreme temperatures and harsh chemical environments, ensuring system integrity and longevity.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.640" |
| Outside Diameter | 4.098" |
| Cross Section | 0.080" |
Specified by design engineers worldwide, this Silicone O-ring features a precise 9.640-inch inside diameter, 4.098-inch outside diameter, and a 0.080-inch cross-section. The polycarbonate material provides excellent resistance to a wide range of chemicals, UV radiation, and ozone, while maintaining flexibility across a broad temperature spectrum (-55°C to +200°C). Its inherent dielectric properties make it suitable for electrical insulation applications, and its low compression set ensures long-term sealing performance in static and dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply a thin, uniform layer of compatible lubricant if required by the application. 3. Carefully install the O-ring into its designated groove, avoiding excessive stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply lubricant and gently seat the O-ring, ensuring it is not pinched or rolled during assembly. |
| Incorrect O-ring size for the groove, causing leakage or premature failure. | Verify O-ring dimensions against groove specifications before installation to ensure a proper fit. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Aerospace fluid handling systems, Medical equipment seals, Food and beverage processing, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||