This industrial-grade silicone O-ring, constructed with a 304 stainless steel core, offers exceptional sealing integrity in demanding environments. Engineered for longevity and superior performance, it provides a reliable barrier against leaks in various applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.236" |
| Outside Diameter | 2.124" |
| Cross Section | 0.138" |
Engineered for reliability and performance, this industrial O-ring features a precise Inside Diameter of 9.236 inches, an Outside Diameter of 2.124 inches, and a robust Cross Section of 0.138 inches. The 304 stainless steel construction ensures excellent corrosion resistance, mechanical strength, and stability across a wide temperature range. This makes it ideal for applications exposed to aggressive chemicals, high pressures, and extreme temperatures where standard elastomers may degrade. Its robust design guarantees a secure seal, preventing fluid or gas leakage and ensuring operational efficiency and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Lubricate the O-ring and groove with a compatible lubricant if necessary. 3. Carefully place the O-ring into its designated groove, ensuring it is seated properly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure. Use appropriate tools if required for difficult installations. |
| Incorrect lubricant selection, causing material degradation. | Always consult compatibility charts and use lubricants specifically approved for silicone and the operating environment. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: High-pressure hydraulic systems, Chemical processing equipment, Food and beverage machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||