This industrial-grade Silicone O-Ring provides exceptional sealing performance in challenging environments. Its robust construction ensures reliable containment and protection across a wide temperature range.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.285" |
| Outside Diameter | 9.146" |
| Cross Section | 0.215" |
Built to exacting engineering tolerances, this Silicone O-Ring features an Inside Diameter of 2.285 inches, an Outside Diameter of 9.146 inches, and a Cross Section of 0.215 inches. Fabricated from high-purity silicone, it exhibits excellent flexibility, resilience, and resistance to extreme temperatures (typically -60°C to 230°C). Its inert nature makes it suitable for contact with a variety of fluids and gases, ensuring a secure and long-lasting seal in demanding industrial applications where chemical compatibility and thermal stability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of any debris or burrs. 2. Carefully stretch the O-ring over the smaller mating component or into the groove, avoiding excessive force or stretching. 3. Gently seat the O-ring fully into its designated groove, confirming a uniform fit without twists or kinks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overt-stretching the O-ring during installation. | Apply minimal, controlled stretching. If significant force is required, double-check the groove dimensions or consider a lubricant. |
| Installing on a contaminated or damaged groove surface. | Thoroughly clean and inspect the groove for any imperfections, ensuring a smooth and compatible sealing surface. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Automotive Fluid Systems, Food and Beverage Processing, Medical Device Sealing, High-Temperature Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||