Engineered for superior sealing in demanding industrial environments, this Silicone O-ring offers exceptional resilience and longevity. Its robust carbon steel construction ensures reliable performance under extreme conditions.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.257" |
| Outside Diameter | 10.024" |
| Cross Section | 0.165" |
Trusted by engineers across multiple sectors, this Industrial O-Ring, crafted from high-grade silicone, provides exceptional sealing integrity in critical applications. With an inside diameter of 2.257 inches, an outside diameter of 10.024 inches, and a precise 0.165-inch cross-section, it meets stringent performance requirements. Silicone's inherent resistance to extreme temperatures, weathering, and ozone makes it ideal for environments ranging from -60°C to +200°C. The carbon steel housing offers enhanced structural support and corrosion resistance, ensuring durability in challenging operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring within its designated groove, avoiding stretching or twisting. 3. Apply gentle, even pressure to seat the O-ring fully, ensuring a consistent seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners leading to O-ring extrusion or damage. | Adhere to specified torque values for all fasteners to prevent over-compression of the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade silicone. | Consult material compatibility charts and use only silicone-approved lubricants and cleaning solutions. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: High-temperature fluid sealing, Chemical processing equipment, Aerospace and automotive systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||