This industrial-grade Silicone O-Ring, featuring a robust 316 Stainless Steel construction, offers superior sealing performance. Engineered for reliability in demanding applications, it ensures leak-free operation and extended service life.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.655" |
| Outside Diameter | 9.457" |
| Cross Section | 0.141" |
Specified by design engineers worldwide, this Silicone O-Ring is manufactured to exacting tolerances. With an Inside Diameter of 7.655 inches, an Outside Diameter of 9.457 inches, and a Cross Section of 0.141 inches, it provides a precise seal. The 316 Stainless Steel components offer exceptional corrosion resistance, making it suitable for harsh chemical environments and high-temperature applications, ensuring integrity and longevity in critical fluid and gas systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect O-ring for defects prior to installation. 2. Ensure mating surfaces are clean and free from debris. 3. Carefully compress the O-ring into its designated groove, avoiding any sharp tools that could cause damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure. Utilize appropriate installation tools if necessary. |
| Installing on a contaminated or damaged groove surface. | Thoroughly clean and inspect the groove before installing the O-ring. Repair or replace damaged components. |
A: This Industrial O-Ring, Silicone is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Food and Beverage Manufacturing, Aerospace Fluid Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||