This industrial-grade Silicone O-Ring, encased in durable 304 Stainless Steel, offers exceptional sealing performance across a wide temperature range. Engineered for reliability in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 6.562" |
| Outside Diameter | 5.923" |
| Cross Section | 0.178" |
Specified by design engineers worldwide, this Silicone O-Ring features a precise Inside Diameter of 6.562 inches and an Outside Diameter of 5.923 inches, with a critical Cross Section of 0.178 inches. The robust 304 Stainless Steel housing provides superior corrosion resistance and structural integrity, making it ideal for high-pressure applications and aggressive media. Silicone's inherent flexibility and temperature resistance ensure a reliable seal from -55°C to +200°C, compatible with food-grade and medical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free of debris. 2. Carefully install the O-ring into the groove, avoiding any stretching or twisting. 3. Verify proper seating and compression before assembly is completed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring during installation. | Gently ease the O-ring into the groove, using a lubricant if necessary, to prevent overstretching and premature failure. |
| Using incompatible lubricants or cleaning agents. | Always consult the material compatibility chart for silicone and 304 stainless steel to ensure approved lubricants and cleaning agents are used. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Medical Device Seals, Chemical Processing Pipelines, Pharmaceutical Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||