This industrial-grade silicone O-ring ensures superior sealing performance. Its robust silicone material and precise dimensions make it ideal for critical applications requiring reliable fluid and gas containment.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.044" |
| Outside Diameter | 1.887" |
| Cross Section | 0.265" |
Built to exacting engineering tolerances, this silicone O-ring features an inside diameter of 5.044 inches, an outside diameter of 1.887 inches, and a cross-section of 0.265 inches. The compound is formulated for excellent resistance to temperature extremes, UV radiation, and ozone, while maintaining flexibility. The brass component provides enhanced corrosion resistance and structural integrity in demanding industrial settings. Suitable for use in food processing, medical equipment, and automotive applications where hygiene and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Carefully place the O-ring into its designated groove. 3. Apply a thin, compatible lubricant if necessary for ease of assembly and to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially pinching or cutting the O-ring. | Apply gentle, even pressure. Utilize appropriate tools if needed, ensuring they do not contact the O-ring directly. |
| Installing the O-ring on contaminated or damaged mating surfaces. | Thoroughly clean and inspect all sealing surfaces for any imperfections before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-temperature sealing in aerospace components, Medical device fluid management systems, Food and beverage processing equipment seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||