This industrial-grade Silicone O-ring, reinforced with nylon for enhanced durability, offers superior sealing performance in challenging environments. Engineered for reliability and longevity in critical applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.421" |
| Outside Diameter | 5.449" |
| Cross Section | 0.134" |
Specified by design engineers worldwide, this Silicone O-ring features a precise Inside Diameter of 2.421 inches, an Outside Diameter of 5.449 inches, and a 0.134-inch cross-section. The integrated nylon reinforcement significantly improves tensile strength, tear resistance, and extrusion resistance, making it suitable for high-pressure and abrasive conditions. Its excellent thermal stability and broad chemical compatibility ensure reliable sealing across a wide temperature range (-50°C to 200°C) and resistance to oils, greases, and many solvents. This robust construction guarantees extended service life in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from burrs or debris. 2. Carefully stretch the O-ring over the component or into the groove, avoiding excessive force or sharp tools. 3. Verify proper seating and compression of the O-ring to achieve a secure and leak-free seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants or cleaning agents that can degrade silicone. | Consult material compatibility charts and use only approved lubricants and cleaning agents for silicone. |
| Over-stretching or twisting the O-ring during installation, leading to premature failure. | Handle the O-ring with care, install it without twisting, and ensure it is properly seated in its groove. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Automotive Engine Sealing, Aerospace Fluid Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||