This industrial-grade silicone O-ring provides reliable, long-lasting sealing solutions. Its superior flexibility and wide temperature range make it ideal for demanding environments and critical applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.956" |
| Outside Diameter | 2.469" |
| Cross Section | 0.268" |
Manufactured under strict quality controls, this silicone O-ring boasts an Inside Diameter of 9.956 inches, an Outside Diameter of 2.469 inches, and a precise Cross Section of 0.268 inches. Silicone's inherent properties, including excellent elasticity across a broad temperature spectrum (-55°C to 230°C), resistance to ozone and UV radiation, and compliance with FDA regulations for food contact applications, ensure superior sealing performance in static and dynamic systems. Its low compression set guarantees a persistent seal over extended operational periods, preventing leaks in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from burrs or foreign material. 2. Carefully stretch the O-ring over the smaller component or into the groove, avoiding excessive force or sharp tools. 3. If installing onto a shaft, gently roll the O-ring into place, ensuring it seats evenly within the groove without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to over-compression of the O-ring. | Adhere to specified torque values for all fasteners to ensure optimal compression without damaging the seal. |
| Using O-rings with incorrect dimensions or material compatibility for the application. | Always verify O-ring specifications (ID, OD, cross-section, material) against the groove dimensions and the chemical/thermal environment. |
| Twisting or kinking the O-ring during installation. | Ensure the O-ring lies flat within the groove and is not twisted, as this will compromise the seal's integrity. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Equipment, High-Temperature Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||