This industrial-grade Silicone O-ring provides reliable sealing for a wide range of applications. Its premium material ensures excellent flexibility, chemical resistance, and performance across a broad temperature spectrum.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 5.814" |
| Outside Diameter | 4.502" |
| Cross Section | 0.189" |
Manufactured under strict quality controls, this Silicone O-ring exhibits a precise Inside Diameter of 5.814 inches, an Outside Diameter of 4.502 inches, and a Cross Section of 0.189 inches. The carbon steel core offers robust structural integrity and dimensional stability, while the silicone elastomer provides superior sealing capabilities, excellent resistance to ozone, UV radiation, and a wide operating temperature range, making it ideal for static and dynamic sealing in harsh environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free of debris. 2. Carefully compress the O-ring to fit within the designated groove or mating surface. 3. Verify proper seating and a consistent seal under operational pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or damage. | Apply torque specifications precisely to mounting hardware to avoid excessive compression. |
| Using an O-ring with incompatible chemical resistance properties. | Always verify the chemical compatibility of the silicone material with the fluid or gas being sealed. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Automotive fluid systems, Industrial machinery seals, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||