This industrial O-ring features a durable Nylon-reinforced Silicone construction, offering superior sealing in demanding environments. Precisely manufactured to exact specifications for a reliable, long-lasting seal.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.655" |
| Outside Diameter | 7.721" |
| Cross Section | 0.169" |
Engineered for reliability and performance, this industrial O-ring boasts a precise Inside Diameter of 7.655 inches and an Outside Diameter of 7.721 inches, with a nominal Cross Section of 0.169 inches. The core material, Silicone, provides excellent flexibility, temperature resistance (-50°C to +200°C), and chemical inertness. The integrated Nylon reinforcement enhances tensile strength and abrasion resistance, making it suitable for moderate pressure applications where standard silicone might degrade. Its durometer rating ensures a tight, conforming seal against mating surfaces, preventing leakage in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully stretch the O-ring over the component, avoiding sharp edges or excessive force. 3. Verify the O-ring is properly seated within its groove without twisting or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive compression and premature failure. | Tighten fasteners to the manufacturer's recommended torque specifications to achieve proper sealing without damaging the O-ring. |
| Using incompatible lubricants that can degrade the Silicone material. | Consult a chemical compatibility chart for Silicone and select a lubricant specifically designed for this material. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Automotive fluid systems, Food and beverage processing equipment, Medical device seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||