This industrial-grade Silicone O-ring, featuring a robust Nylon reinforcement, delivers exceptional sealing performance. Its specialized material composition ensures reliability in challenging environments, offering superior durability and a broad temperature range for critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 1.433" |
| Outside Diameter | 9.596" |
| Cross Section | 0.174" |
Precision-manufactured to tight tolerances, this Silicone O-ring boasts an Inside Diameter of 1.433 inches, an Outside Diameter of 9.596 inches, and a Cross Section of 0.174 inches. The inherent properties of silicone, such as its excellent flexibility, high tensile strength, and resistance to extreme temperatures (typically -60°C to +230°C), are further enhanced by the integrated Nylon material, providing increased tear strength and dimensional stability. This combination makes it ideal for dynamic and static sealing in food processing, medical equipment, and automotive systems where chemical inertness and long-term performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris or damage. 2. Carefully position the O-ring within its groove, avoiding excessive stretching or twisting. 3. Apply a light, compatible lubricant if necessary to facilitate installation and ensure a proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or overstretching the O-ring during installation. | Gently guide the O-ring into its groove, using only the necessary tension to seat it properly. Consult the equipment's manual for recommended installation procedures. |
| Using incompatible lubricants or cleaning agents. | Always verify that any lubricants or cleaning agents are compatible with silicone and the specific application environment to prevent material degradation. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Manufacturing, Automotive Engine and Transmission Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||