This industrial-grade Silicone O-ring, reinforced with a 304 Stainless Steel housing, provides exceptional sealing performance in demanding environments. Its robust construction ensures reliability and longevity in critical applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.528" |
| Outside Diameter | 5.917" |
| Cross Section | 0.235" |
Precision-manufactured to tight tolerances, this Silicone O-ring features an Inside Diameter of 2.528 inches, an Outside Diameter of 5.917 inches, and a Cross Section of 0.235 inches. The 304 Stainless Steel housing offers superior corrosion resistance, high tensile strength, and broad temperature tolerance, making it ideal for applications involving aggressive chemicals, extreme temperatures, and high pressures. The silicone elastomer provides excellent flexibility, low compression set, and good sealing across a wide range of operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free from debris. 2. Carefully position the O-ring within its designated groove or housing. 3. Apply moderate and even pressure to seat the O-ring completely, avoiding excessive force or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| O-ring is twisted or pinched during installation. | Ensure the O-ring is seated evenly in its groove and avoid any twisting or pinching motion during the installation process. |
| Contaminated sealing surfaces leading to leaks. | Thoroughly clean both the O-ring groove and the mating surface before installation to remove any dirt, oil, or debris. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Aerospace fluid systems, High-temperature sealing applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||