This industrial-grade Silicone O-Ring offers superior sealing performance in a wide temperature range. Engineered for resilience and durability, it's ideal for critical applications requiring a reliable seal.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.000" |
| Outside Diameter | 8.255" |
| Cross Section | 0.240" |
Specified by design engineers worldwide, this Silicone O-Ring boasts precise dimensions of 3.000" (76.2mm) Inside Diameter, 8.255" (209.68mm) Outside Diameter, and a 0.240" (6.09mm) Cross Section. Fabricated from high-quality Aluminum 6061, it provides excellent corrosion resistance and structural integrity, making it suitable for environments exposed to moderate pressures and temperatures. Its inherent flexibility and low compression set ensure long-term sealing effectiveness across diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly machined according to design specifications. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant to prevent damage during installation and ensure a proper seal. 3. Gently install the O-ring into the groove, avoiding stretching, twisting, or using sharp tools that could puncture or nick the seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply consistent, moderate pressure and use appropriate, non-marring installation tools. |
| Improper groove preparation, leaving contaminants that compromise the seal. | Thoroughly clean and inspect the groove for burrs, sharp edges, and foreign particles before installing the O-ring. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Automotive systems requiring robust sealing, Aerospace fluid and gas containment, Industrial machinery and equipment seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||