This industrial-grade Silicone O-Ring, manufactured from Aluminum 6061, provides exceptional sealing performance. Engineered for reliability, it offers superior resistance to extreme temperatures and a wide range of chemicals, ensuring long-term integrity in critical applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.341" |
| Outside Diameter | 10.531" |
| Cross Section | 0.273" |
Specified by design engineers worldwide, this Silicone O-Ring boasts an Inside Diameter of 9.341 inches and an Outside Diameter of 10.531 inches, with a precise Cross Section of 0.273 inches. The Aluminum 6061 material composition offers excellent thermal stability, making it suitable for applications operating across a broad temperature spectrum, from cryogenic to elevated conditions. Its inherent resistance to UV radiation, ozone, and various solvents ensures consistent sealing in challenging environments. Ideal for food processing, medical equipment, aerospace, and chemical industries where purity and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and absence of debris. 2. Carefully stretch the O-ring over the component, avoiding any sharp tools that could cause nicks or cuts. 3. Ensure the O-ring is properly seated and evenly compressed within its designated groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to excessive compression and premature failure. | Refer to the system's design specifications for the correct compression range and avoid over-tightening. |
| Using a size O-ring that is too small or too large for the intended groove. | Always verify the O-ring dimensions against the groove dimensions using precision measuring tools. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: High-temperature sealing in ovens and furnaces, Cryogenic sealing for low-temperature equipment, Chemical processing equipment requiring broad chemical compatibility.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||