Engineered for superior performance in extreme environments, this Nylon-reinforced Silicone O-ring provides exceptional sealing integrity. Its robust construction ensures reliability under high stress and demanding conditions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.389" |
| Outside Diameter | 8.249" |
| Cross Section | 0.089" |
Purpose-built for heavy-duty applications, this industrial O-ring features a precise Inside Diameter of 0.389", an Outside Diameter of 8.249", and a Cross Section of 0.089". The core material is high-grade Silicone, renowned for its broad temperature range (-60°C to +230°C) and excellent resistance to ozone, UV, and weathering. The integrated Nylon reinforcement significantly enhances tensile strength and dimensional stability, preventing extrusion and deformation under pressure. This combination makes it ideal for critical sealing in aerospace, automotive, and high-pressure hydraulic systems where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully install the O-ring, avoiding excessive stretching or twisting. 3. Verify proper seating and compression of the O-ring within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing O-ring extrusion. | Adhere to specified torque values for all fasteners to ensure controlled compression. |
| Using incompatible lubricants, degrading the Silicone material. | Consult material compatibility charts for approved lubricants prior to installation. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: High-pressure hydraulic systems, Aerospace fluid connectors, Automotive engine seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||