This industrial-grade silicone O-ring offers exceptional sealing performance across a wide temperature range. Engineered for reliability in critical applications, it ensures effective containment and protection.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.094" |
| Outside Diameter | 7.383" |
| Cross Section | 0.183" |
Built to exacting engineering tolerances, this silicone O-ring features an Inside Diameter of 3.094 inches, an Outside Diameter of 7.383 inches, and a precise Cross Section of 0.183 inches. Silicone's inherent flexibility and resistance to extreme temperatures (typically -50°C to +230°C) make it ideal for sealing in environments where other elastomers would degrade. Its excellent dielectric properties and biocompatibility also lend themselves to specialized uses in electrical and food-grade applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully position the O-ring within its groove, avoiding any stretching or twisting. 3. Apply light lubrication if necessary, compatible with the O-ring material and application environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension. It should seat snugly in the groove without being distorted. |
| Using incompatible lubricants or cleaning agents. | Always verify that any lubricant or cleaning agent is compatible with silicone elastomers to prevent material degradation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature sealing in ovens and dryers, Food and beverage processing equipment, Medical device seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||