Engineered for demanding industrial environments, this high-performance silicone O-ring provides exceptional sealing capabilities. Its robust construction ensures reliability across a wide temperature range and in corrosive conditions.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.048" |
| Outside Diameter | 5.856" |
| Cross Section | 0.083" |
A proven choice for industrial professionals, this silicone O-ring is meticulously manufactured to precise tolerances, ensuring optimal sealing performance in critical applications. With an inside diameter of 1.048 inches, an outside diameter of 5.856 inches, and a cross-section of 0.083 inches, it offers a superior fit and seal. Silicone's inherent properties, including excellent resistance to extreme temperatures (both hot and cold), UV radiation, ozone, and a broad spectrum of chemicals, make it ideal for food-grade, medical, automotive, and aerospace industries where purity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from debris. 2. Carefully stretch the O-ring over the smallest diameter of the mating component or into the groove. 3. Verify proper seating and compression of the O-ring within the groove to achieve a leak-proof seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears in the O-ring. | Handle the O-ring with care. If resistance is met, re-evaluate the installation path or consider a slightly larger O-ring for ease of assembly. |
| Installing the wrong size O-ring, resulting in improper compression or leakage. | Always verify the O-ring dimensions (ID, OD, CS) against the groove dimensions and design specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Automotive engine and transmission seals, Food processing equipment seals, Medical device seals, Aerospace fluid and air system seals, Industrial pump and valve seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||