This industrial-grade O-ring features a robust Nylon reinforcement within a flexible Silicone elastomer. Engineered for superior sealing in demanding environments, it offers excellent resistance to temperature and chemicals.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.440" |
| Outside Diameter | 8.505" |
| Cross Section | 0.117" |
Specified by design engineers worldwide, this Silicone O-ring boasts a precise 6.440" inside diameter, an 8.505" outside diameter, and a 0.117" cross-section. The inherent properties of Silicone, including its broad operating temperature range and resistance to UV, ozone, and weathering, are enhanced by the structural integrity provided by the Nylon reinforcement. This combination ensures reliable sealing performance in applications requiring both flexibility and dimensional stability, preventing leaks and maintaining system integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Carefully position the O-ring within its designated groove. 3. Apply light, even pressure to seat the O-ring, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension, ensuring it conforms to the groove geometry. |
| Using incompatible lubricants or cleaning agents. | Consult material compatibility charts to select lubricants and cleaning agents suitable for Silicone and Nylon. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Automotive sealing systems, Aerospace fluid handling, Medical device assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||