This industrial-grade Silicone O-ring, manufactured with a robust Aluminum 6061 core, provides superior sealing in extreme temperature environments. Engineered for reliability and longevity in critical fluid and gas systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.768" |
| Outside Diameter | 6.850" |
| Cross Section | 0.258" |
Specified by design engineers worldwide, this custom industrial O-ring features an Inside Diameter of 2.768 inches, an Outside Diameter of 6.850 inches, and a precise Cross Section of 0.258 inches. The core material, Aluminum 6061, offers excellent machinability and corrosion resistance, while the silicone elastomer provides exceptional flexibility, a wide operating temperature range (-60°C to 230°C), and superior resistance to ozone, UV, and weathering. This combination ensures reliable sealing in applications subjected to rigorous environmental conditions and chemical exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within its designated groove, avoiding stretching or twisting. 3. Apply a light lubricant compatible with the sealing material and application if necessary for easier assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Carefully place the O-ring into its groove without excessive tension to prevent premature failure and loss of sealing integrity. |
| Using incompatible lubricants or cleaning agents. | Always consult material compatibility charts to ensure lubricants and cleaning agents will not degrade the silicone elastomer or the Aluminum 6061 core. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Automotive powertrain seals, Aerospace fluid systems, Industrial machinery and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||