This industrial-grade Silicone O-Ring, fabricated with a robust Aluminum 6061 core, provides superior sealing performance. Engineered for exceptional durability and resistance, it ensures reliable operation in challenging environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 8.035" |
| Outside Diameter | 2.360" |
| Cross Section | 0.188" |
Built to exacting engineering tolerances, this Silicone O-Ring features a precise Inside Diameter of 8.035 inches and an Outside Diameter of 2.360 inches, with a 0.188-inch cross-section. The Aluminum 6061 material offers excellent corrosion resistance and structural integrity, making it suitable for applications requiring a rigid yet lightweight sealing component. Its inherent properties ensure consistent performance across a wide temperature range and in the presence of various fluids, providing a secure and long-lasting seal in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free of burrs or debris. 2. Carefully position the O-Ring into the groove, avoiding excessive stretching or twisting. 3. Apply a thin, uniform layer of compatible lubricant if recommended for the application to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-Ring damage. | Apply lubricant and allow the O-Ring to seat naturally into the groove, using minimal pressure. |
| Incorrect O-Ring size selection for the groove dimensions. | Verify O-Ring specifications against the groove design and consult datasheets for precise dimensional compatibility. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, Aerospace and Automotive Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||