Engineered for extreme environments, this industrial Silicone O-ring features a robust 304 Stainless Steel construction. Offering superior resilience and chemical resistance, it ensures reliable sealing in demanding applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.633" |
| Outside Diameter | 10.679" |
| Cross Section | 0.155" |
Specified by design engineers worldwide, this industrial Silicone O-ring is manufactured to exacting tolerances. Featuring an Inside Diameter of 6.633 inches, an Outside Diameter of 10.679 inches, and a precise 0.155-inch cross-section, it is constructed from high-grade 304 Stainless Steel for exceptional corrosion resistance and high-temperature performance. This material combination ensures superior sealing integrity in demanding chemical, food processing, and pharmaceutical applications where purity and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully place the O-ring within its designated groove, avoiding stretching or twisting. 3. Apply light, even pressure to seat the O-ring, ensuring a proper seal without deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners causing O-ring compression beyond its elastic limit. | Adhere to specified torque values for mating components to prevent over-compression and premature failure. |
| Using incompatible cleaning agents that degrade the Silicone material. | Refer to the material compatibility chart for approved cleaning solutions suitable for Silicone. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: High-temperature fluid sealing, Chemical processing equipment, Food and beverage processing lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||