This industrial O-ring features a robust silicone core reinforced with nylon for enhanced durability. It provides exceptional sealing performance in a variety of challenging environments, ensuring reliable operation.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 3.500" |
| Outside Diameter | 9.672" |
| Cross Section | 0.070" |
A high-performance industrial component, this O-ring boasts a precision Inside Diameter of 3.500 inches and an Outside Diameter of 9.672 inches, with a critical Cross Section of 0.070 inches. Constructed from premium silicone, its inherent flexibility and resilience are augmented by nylon reinforcement, offering superior resistance to compression set, extreme temperatures (ranging from -60°C to +230°C), and a broad spectrum of chemicals. This combination makes it ideal for dynamic and static sealing applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, dry, and free of debris. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges or twisting. 3. Gently seat the O-ring into its designated groove, confirming a snug and even fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature failure. | Use appropriate tools and techniques to install the O-ring without excessive elongation. Consider slightly warming the O-ring in some applications to improve flexibility. |
| Installing the O-ring into a contaminated or damaged groove. | Thoroughly inspect and clean the groove before installation. Repair or replace any damaged grooves to ensure a proper seal. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Automotive sealing systems, Food and beverage processing equipment, Aerospace fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||