This industrial-grade silicone O-ring, reinforced with brass, provides exceptional sealing performance in challenging conditions. Its robust construction ensures reliability in high-pressure and extreme temperature applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.326" |
| Outside Diameter | 3.077" |
| Cross Section | 0.155" |
Designed for demanding industrial environments, this silicone O-ring offers superior resilience and chemical resistance. The precise dimensions of a 1.326" inside diameter, 3.077" outside diameter, and a 0.155" cross-section ensure a tight, leak-proof seal. The inherent properties of silicone, enhanced by the brass infusion, allow for operation across a wide temperature range and resistance to many industrial fluids. This makes it a critical component in hydraulic systems, pneumatic assemblies, and chemical processing equipment where consistent performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the groove and the O-ring thoroughly with a compatible solvent. 2. Lightly lubricate the O-ring with a non-hardening lubricant approved for silicone and the application environment. 3. Carefully place the O-ring into the designated groove, ensuring it is seated without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure and utilize appropriate tools if necessary to avoid deforming or tearing the O-ring. |
| Using incompatible lubricants or cleaning agents. | Always verify lubricant and cleaning agent compatibility with silicone and the specific media being sealed to prevent material degradation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-temperature hydraulic systems, Chemical processing equipment, Pneumatic actuators and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||