This industrial-grade silicone O-ring provides superior sealing in a wide range of applications. Its robust material offers excellent resistance to temperature extremes and chemicals, ensuring reliable performance and longevity.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 6.272" |
| Outside Diameter | 9.683" |
| Cross Section | 0.241" |
Manufactured under strict quality controls, this silicone O-ring features an Inside Diameter of 6.272 inches, an Outside Diameter of 9.683 inches, and a Cross Section of 0.241 inches. Silicone's inherent properties of excellent thermal stability, resistance to ozone and UV degradation, and flexibility at low temperatures make it ideal for sealing dynamic and static components. Its broad operating temperature range and good dielectric properties further enhance its suitability for demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Lightly lubricate the O-ring and the groove with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, ensuring it sits flush.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring excessively during installation. | Install the O-ring without overstretching. If the O-ring must be stretched, do so minimally and ensure it is designed for that purpose. |
| Using incompatible lubricants or cleaning agents. | Always consult the material compatibility chart for the specific O-ring material and the fluids it will encounter. Use only approved lubricants. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Automotive seals, Aerospace components, Food processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||