This industrial-grade silicone O-ring provides superior sealing performance and thermal stability. Designed for critical applications requiring robust chemical resistance and a wide operating temperature range.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.122" |
| Outside Diameter | 4.604" |
| Cross Section | 0.187" |
Engineered for reliability and performance, this industrial O-ring boasts an Inside Diameter of 6.122 inches and an Outside Diameter of 4.604 inches, with a precise 0.187-inch cross-section. Fabricated from high-purity silicone, it offers excellent flexibility, resistance to extreme temperatures (-60°F to 450°F), and a broad spectrum of chemical inertness, making it ideal for food-grade, medical, and high-temperature sealing applications where ozone and UV resistance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from burrs or contaminants. 2. Carefully place the O-ring into its designated groove, avoiding stretching or twisting. 3. Assemble mating components with controlled pressure to achieve a proper seal without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive tension to prevent premature failure and maintain sealing integrity. |
| Using an O-ring with incompatible chemical resistance. | Verify the chemical compatibility of silicone with the fluid or gas being sealed before selection and installation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Equipment, Aerospace and Automotive Sealing Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||