This industrial O-ring features a durable carbon steel core encased in high-grade silicone. Engineered for superior sealing performance in challenging environments, it provides reliable containment for a wide range of fluids and gases.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.981" |
| Outside Diameter | 6.510" |
| Cross Section | 0.228" |
Specified by design engineers worldwide, this industrial O-ring boasts a precise 9.981" inside diameter, 6.510" outside diameter, and a 0.228" cross-section. The robust carbon steel core offers exceptional structural integrity and resistance to compression set, while the premium silicone elastomer provides excellent flexibility, a broad operating temperature range (-55°C to +230°C), and resistance to many chemicals, ozone, and UV radiation. This combination ensures long-term, leak-free sealing in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris. 2. Carefully inspect the O-ring for any damage or imperfections before installation. 3. Gently place the O-ring into its designated groove, ensuring it is properly seated and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive stretching; it should fit snugly into the groove. |
| Using a contaminated groove or O-ring. | Thoroughly clean both the groove and the O-ring before proceeding with installation. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Automotive sealing systems, Aerospace fluid and gas seals, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||