This industrial-grade silicone O-ring offers exceptional sealing capabilities in demanding environments. Its robust material ensures long-term reliability and resistance to a wide range of chemicals and temperatures.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 0.895" |
| Outside Diameter | 8.003" |
| Cross Section | 0.094" |
Engineered for reliability and performance, this silicone O-ring boasts an inside diameter of 0.895 inches, an outside diameter of 8.003 inches, and a precise 0.094-inch cross-section. Fabricated from high-quality silicone rubber, it exhibits superior flexibility, excellent thermal stability across a broad temperature range (-55°C to +200°C), and good resistance to ozone, UV, and weathering. Its Shore A hardness of 50-60 ensures a proper seal under moderate compression, making it suitable for static and dynamic applications where inertness and resilience are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and mating surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Seat the O-ring fully within its designated groove, ensuring it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or stretching. | Gently stretch the O-ring and use appropriate tools or lubrication if necessary to avoid tearing or permanent deformation. |
| Installing a twisted or pinched O-ring, compromising the seal integrity. | Verify that the O-ring is seated flush within the groove and is not exhibiting any twists or kinks before assembly. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Aerospace sealing systems, Food and beverage processing equipment, Automotive fluid handling components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||