This industrial-grade silicone O-ring features a robust brass core, engineered for superior sealing performance in extreme conditions. Its precise dimensions and durable material make it ideal for critical fluid and gas containment.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 4.886" |
| Outside Diameter | 4.344" |
| Cross Section | 0.159" |
Purpose-built for heavy-duty applications, this silicone O-ring is designed to maintain seal integrity under significant pressure and temperature fluctuations. The 4.886" inside diameter, 4.344" outside diameter, and 0.159" cross-section, combined with the inherent flexibility and chemical resistance of silicone, are further enhanced by the brass reinforcement. This construction prevents extrusion and deformation in high-stress environments, ensuring long-term reliability in demanding industrial fluid handling systems, chemical processing equipment, and high-pressure hydraulic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding overstretching or sharp edges. 3. Seat the O-ring fully within its designated groove to achieve a uniform seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently ease the O-ring into place, using lubrication if necessary, to prevent permanent deformation or damage to the material. |
| Using the wrong size O-ring for the application. | Always verify the inside diameter, outside diameter, and cross-section against the groove dimensions and required seal compression. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-pressure hydraulic systems, Chemical processing equipment, Automotive fluid seals, Industrial pump and valve assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||