This robust industrial O-ring, crafted from durable carbon steel, offers exceptional sealing capabilities. Designed for high-pressure applications, it ensures leak-proof performance and longevity in critical systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.274" |
| Outside Diameter | 9.849" |
| Cross Section | 0.245" |
Trusted by engineers across multiple sectors, this industrial O-ring is precision-manufactured from high-grade carbon steel for superior strength and resilience. Its dimensions of 1.274" Inside Diameter, 9.849" Outside Diameter, and 0.245" Cross Section make it ideal for demanding sealing applications where chemical resistance and high mechanical integrity are paramount. The material's properties make it suitable for environments with moderate temperatures and pressures, ensuring consistent performance and extended service life in industrial machinery and fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully place the O-ring into its designated groove. 3. Apply a light lubricant if recommended by the system's design before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or stretching the O-ring during installation. | Install the O-ring without excessive force or stretching to prevent premature failure and maintain sealing integrity. |
| Using the wrong O-ring size for the application. | Always verify the O-ring dimensions (ID, OD, CS) against the groove specifications to ensure a proper fit and effective seal. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic Systems, Pneumatic Equipment, Fluid Power Transmission.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||