This industrial-grade silicone O-ring, reinforced with nylon, offers exceptional sealing performance. Its robust construction ensures reliable operation in challenging environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.026" |
| Outside Diameter | 5.082" |
| Cross Section | 0.271" |
Built to exacting engineering tolerances, this industrial O-ring features an Inside Diameter (ID) of 1.026 inches, an Outside Diameter (OD) of 5.082 inches, and a Cross Section (CS) of 0.271 inches. The core material, silicone, provides excellent flexibility, high and low-temperature resistance (-60°C to +230°C), and good resistance to weathering and ozone. The integrated nylon reinforcement enhances its tensile strength and resistance to extrusion, making it suitable for applications requiring higher pressures or dynamic movement. This combination ensures superior sealing integrity and extended service life in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or debris. 2. Carefully position the O-ring within the groove, avoiding any twisting or stretching. 3. Apply a light coat of compatible lubricant if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive tension to prevent premature failure and loss of sealing capability. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the groove for any imperfections before installation to ensure a proper seal. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: High-temperature fluid sealing, Chemical processing equipment, Automotive and aerospace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||