This industrial-grade silicone O-ring provides superior sealing in challenging environments. Engineered for reliable performance and longevity, it is ideal for applications requiring resistance to high and low temperatures and various chemicals.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.241" |
| Outside Diameter | 6.245" |
| Cross Section | 0.158" |
Built to exacting engineering tolerances, this silicone O-ring features an inside diameter of 3.241 inches, an outside diameter of 6.245 inches, and a precise cross-section of 0.158 inches. The carbon steel material composition offers exceptional durability and corrosion resistance, making it suitable for rigorous industrial use. Silicone's inherent flexibility and wide operating temperature range (-60°F to 450°F) ensure a consistent and leak-proof seal across various demanding conditions. This O-ring is engineered for applications where robust sealing and material integrity are paramount, including fluid power systems, automotive components, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Verify the O-ring is properly seated and not pinched before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring excessively during installation. | Gently flex the O-ring to fit into the groove without undue tension. Overstretching can lead to premature failure and leaks. |
| Installing a dirty or damaged O-ring. | Inspect the O-ring for any nicks, cuts, or embedded debris. Clean the groove and the O-ring if necessary with a lint-free cloth. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Fluid Power Systems (Hydraulics & Pneumatics), Automotive Engine and Transmission Seals, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||