This industrial O-ring features a robust Nylon reinforcement within a Silicone elastomer. Engineered for superior sealing performance, it offers excellent resistance to extreme temperatures and chemicals, ensuring reliable operation in critical industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 6.409" |
| Outside Diameter | 8.322" |
| Cross Section | 0.231" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts an Inside Diameter of 6.409 inches, an Outside Diameter of 8.322 inches, and a Cross Section of 0.231 inches. The combination of a high-performance Silicone elastomer with integral Nylon reinforcement provides exceptional mechanical strength and resilience. This material composition offers a broad operating temperature range and excellent resistance to a wide array of chemicals, making it suitable for high-pressure and demanding sealing applications where standard O-rings may fail. The Nylon core enhances extrusion resistance and dimensional stability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating grooves are clean and free of debris. 2. Lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring, avoiding excessive stretching or twisting, to seat it evenly within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to premature failure. | Install with just enough compression to achieve a seal, avoiding excessive force. |
| Using incompatible lubricants that degrade the Silicone material. | Consult material compatibility charts to select a lubricant approved for Silicone and the specific application environment. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: High-temperature fluid power systems, Chemical processing equipment, Automotive and aerospace sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||